Info: 'The Installer’s commands are contained in a control file. There is one control file for each different Adobe application installation. When the installer is launched, it looks in its folder for a control file. If it finds more than one, it'
3:
Bounds: x1=54, y1=87, x2=350, y2=106
Type: -120
Info: 'asks which one is to be used.'
4:
Bounds: x1=147, y1=106, x2=219, y2=136
Type: -64
Info: '™'
DITL_23999_Help ChooseDestFolder.txt
Items: (5 entries)
0:
Bounds: x1=217, y1=159, x2=287, y2=181
Type: 4
Info: 'OK'
1:
Bounds: x1=212, y1=155, x2=291, y2=185
Type: -64
Info: '™'
2:
Bounds: x1=4, y1=8, x2=36, y2=40
Type: -96
Info: ' '
3:
Bounds: x1=51, y1=5, x2=452, y2=73
Type: -120
Info: 'The installer will create the PageMaker 6.0 Tryout folder if it does not already exist. If it does, files in that folder matching those selected for installation will be replaced, but other files in that folder will not be affected.'
4:
Bounds: x1=52, y1=84, x2=454, y2=149
Type: -120
Info: 'You can choose a location other than the startup disk to install the application folder. However, some items used by PageMaker will be installed in the System folder of the startup disk.'
DITL_20100_Help Copying predestined files.txt
Items: (5 entries)
0:
Bounds: x1=198, y1=145, x2=265, y2=168
Type: 4
Info: 'OK'
1:
Bounds: x1=6, y1=8, x2=38, y2=40
Type: -96
Info: ' '
2:
Bounds: x1=44, y1=8, x2=467, y2=62
Type: -120
Info: 'All the files selected for installation have pre-determined locations within the Aldus folder or the System folder on the Startup volume. These locations cannot be changed by you.'
3:
Bounds: x1=44, y1=74, x2=441, y2=143
Type: -120
Info: 'The Aldus folder contains files that may be used by more than one Aldus application. For optimum performance of your Aldus applications, do not move, delete or modify any files in this folder.'
4:
Bounds: x1=193, y1=140, x2=270, y2=173
Type: -64
Info: '™'
DITL_20070_Help Confirm Smart Replacement.txt
Items: (9 entries)
0:
Bounds: x1=200, y1=162, x2=271, y2=184
Type: 4
Info: 'OK'
1:
Bounds: x1=11, y1=12, x2=43, y2=44
Type: -96
Info: ' '
2:
Bounds: x1=52, y1=12, x2=120, y2=29
Type: -120
Info: 'PRESERVE:'
3:
Bounds: x1=142, y1=12, x2=381, y2=29
Type: -120
Info: 'Preserves the file on the hard disk.'
4:
Bounds: x1=52, y1=41, x2=116, y2=57
Type: -120
Info: 'REPLACE:'
5:
Bounds: x1=142, y1=41, x2=457, y2=75
Type: -120
Info: 'Replaces the file on the hard disk with the file from the floppy disk'
6:
Bounds: x1=52, y1=85, x2=138, y2=100
Type: -120
Info: 'CANCEL ALL:'
7:
Bounds: x1=142, y1=85, x2=431, y2=150
Type: -120
Info: 'Closes the “Replace file” dialog box and cancels all the file replacements you approved'
8:
Bounds: x1=195, y1=158, x2=276, y2=188
Type: -64
Info: '™'
DITL_20002_Help Personalize_Serial Number.txt
Items: (7 entries)
0:
Bounds: x1=204, y1=226, x2=266, y2=247
Type: 4
Info: 'OK'
1:
Bounds: x1=10, y1=9, x2=42, y2=41
Type: -96
Info: ' '
2:
Bounds: x1=53, y1=9, x2=467, y2=44
Type: -120
Info: 'You must enter something in the Name and Serial Number fields; the Company field is optional.'
3:
Bounds: x1=53, y1=50, x2=465, y2=84
Type: -120
Info: 'Enter the serial number exactly as you find it. Include all numbers, letters and hyphens.'
4:
Bounds: x1=53, y1=91, x2=452, y2=158
Type: -120
Info: 'If you have upgraded from an earlier version of PageMaker, use your original serial number. Look for it on your original program disks, or inside the front cover of your user manual.'
5:
Bounds: x1=53, y1=164, x2=447, y2=214
Type: -120
Info: 'If you are a new PageMaker user, look for the serial number on Disk 2, or on the Read This First card that is included in your package.'
6:
Bounds: x1=199, y1=222, x2=271, y2=251
Type: -64
Info: '™'
DITL_10001_NOT USED_ RSRCEditor.txt
Items: (12 entries)
0:
Bounds: x1=352, y1=10, x2=384, y2=30
Type: 4
Info: 'OK'
1:
Bounds: x1=393, y1=10, x2=422, y2=32
Type: 4
Info: 'X'
2:
Bounds: x1=17, y1=232, x2=77, y2=252
Type: 4
Info: 'Edit'
3:
Bounds: x1=358, y1=88, x2=418, y2=108
Type: 4
Info: 'Done'
4:
Bounds: x1=359, y1=122, x2=419, y2=142
Type: 4
Info: 'Revert'
5:
Bounds: x1=15, y1=11, x2=325, y2=32
Type: -112
Info: ''
6:
Bounds: x1=14, y1=39, x2=328, y2=60
Type: -120
Info: 'Title'
7:
Bounds: x1=15, y1=65, x2=330, y2=226
Type: 0
Info: ''
8:
Bounds: x1=92, y1=233, x2=152, y2=253
Type: 4
Info: 'Delete'
9:
Bounds: x1=162, y1=234, x2=222, y2=254
Type: 4
Info: 'New'
10:
Bounds: x1=231, y1=235, x2=291, y2=255
Type: 4
Info: 'Up'
11:
Bounds: x1=299, y1=234, x2=359, y2=254
Type: 4
Info: 'Down'
DITL_10000_NOT USED_ BUGMSG.txt
Items: (7 entries)
0:
Bounds: x1=11, y1=76, x2=231, y2=97
Type: 4
Info: 'Continue'
1:
Bounds: x1=10, y1=100, x2=228, y2=121
Type: 4
Info: 'exit()'
2:
Bounds: x1=10, y1=124, x2=227, y2=145
Type: 4
Info: 'ExitToShell'
3:
Bounds: x1=10, y1=148, x2=226, y2=169
Type: 4
Info: 'Debugger'
4:
Bounds: x1=9, y1=4, x2=233, y2=70
Type: -120
Info: ''
5:
Bounds: x1=11, y1=173, x2=226, y2=194
Type: 4
Info: 'No more BUGMSG!'
6:
Bounds: x1=150, y1=79, x2=210, y2=99
Type: -128
Info: ''
DITL_4000_Choose control file.txt
Items: (13 entries)
0:
Bounds: x1=259, y1=162, x2=341, y2=182
Type: 4
Info: 'Open'
1:
Bounds: x1=699, y1=0, x2=717, y2=80
Type: 4
Info: 'Hidden'
2:
Bounds: x1=259, y1=191, x2=341, y2=211
Type: 4
Info: 'Quit'
3:
Bounds: x1=232, y1=39, x2=347, y2=59
Type: -128
Info: ''
4:
Bounds: x1=258, y1=73, x2=340, y2=93
Type: 4
Info: 'Eject'
5:
Bounds: x1=258, y1=103, x2=340, y2=123
Type: 4
Info: 'Desktop'
6:
Bounds: x1=12, y1=39, x2=230, y2=185
Type: 0
Info: ''
7:
Bounds: x1=229, y1=39, x2=246, y2=185
Type: 0
Info: ''
8:
Bounds: x1=255, y1=129, x2=343, y2=130
Type: -128
Info: ''
9:
Bounds: x1=660, y1=0, x2=756, y2=101
Type: -120
Info: ''
10:
Bounds: x1=258, y1=135, x2=340, y2=155
Type: 4
Info: 'Help'
11:
Bounds: x1=12, y1=190, x2=243, y2=223
Type: -120
Info: 'Please choose an Installer control file:'
12:
Bounds: x1=254, y1=158, x2=348, y2=186
Type: -64
Info: 'V'
DITL_3999_ChooseDestFolder.txt
Items: (18 entries)
0:
Bounds: x1=396, y1=64, x2=458, y2=65
Type: -64
Info: ' «'
1:
Bounds: x1=396, y1=38, x2=458, y2=57
Type: 4
Info: 'Cancel'
2:
Bounds: x1=217, y1=106, x2=327, y2=122
Type: -120
Info: 'Install in folder:'
3:
Bounds: x1=219, y1=72, x2=363, y2=96
Type: 0
Info: ''
4:
Bounds: x1=312, y1=9, x2=374, y2=28
Type: 4
Info: 'Eject'
5:
Bounds: x1=312, y1=38, x2=374, y2=57
Type: 4
Info: 'Drive'
6:
Bounds: x1=222, y1=132, x2=400, y2=148
Type: 16
Info: ''
7:
Bounds: x1=10, y1=72, x2=202, y2=168
Type: 0
Info: ''
8:
Bounds: x1=396, y1=72, x2=458, y2=91
Type: 4
Info: 'Help'
9:
Bounds: x1=8, y1=200, x2=203, y2=216
Type: -120
Info: 'Space required: ^0K '
10:
Bounds: x1=8, y1=226, x2=459, y2=258
Type: -120
Info: 'You can... '
11:
Bounds: x1=8, y1=184, x2=203, y2=200
Type: -120
Info: 'Space available: ^1K '
12:
Bounds: x1=396, y1=9, x2=458, y2=28
Type: 4
Info: 'Install'
13:
Bounds: x1=8, y1=6, x2=99, y2=22
Type: -120
Info: 'Install files '
14:
Bounds: x1=217, y1=184, x2=460, y2=200
Type: -120
Info: 'Startup space available: ^3K '
15:
Bounds: x1=217, y1=200, x2=460, y2=216
Type: -120
Info: 'Startup space required: ^2K '
16:
Bounds: x1=9, y1=23, x2=290, y2=25
Type: -64
Info: ' Δ'
17:
Bounds: x1=392, y1=5, x2=462, y2=32
Type: -64
Info: '™'
DITL_3996_Files can't be replace by folders.txt
Items: (2 entries)
0:
Bounds: x1=104, y1=61, x2=178, y2=82
Type: 4
Info: 'OK'
1:
Bounds: x1=68, y1=11, x2=304, y2=49
Type: -120
Info: 'Files can't be replaced by folders'
DITL_300_OS Error.txt
Items: (2 entries)
0:
Bounds: x1=264, y1=104, x2=324, y2=124
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=16, x2=332, y2=87
Type: -120
Info: '^0Result Code = ^1'
DITL_253_assert.txt
Items: (5 entries)
0:
Bounds: x1=282, y1=142, x2=340, y2=162
Type: 4
Info: 'Quit'
1:
Bounds: x1=201, y1=142, x2=259, y2=162
Type: 4
Info: 'Fail'
2:
Bounds: x1=114, y1=142, x2=183, y2=162
Type: 4
Info: 'Continue'
3:
Bounds: x1=57, y1=5, x2=347, y2=86
Type: -120
Info: 'Assertion failed:^0'
4:
Bounds: x1=60, y1=92, x2=302, y2=127
Type: -120
Info: 'File: ^1Line: ^2'
DITL_252_error2.txt
Items: (3 entries)
0:
Bounds: x1=257, y1=138, x2=315, y2=158
Type: 4
Info: 'OK'
1:
Bounds: x1=79, y1=15, x2=323, y2=100
Type: -120
Info: 'Couldn't successfully startup or quit the application because ^0.'
2:
Bounds: x1=81, y1=105, x2=325, y2=123
Type: -120
Info: 'Result Code = ^1'
DITL_251_error1.txt
Items: (3 entries)
0:
Bounds: x1=257, y1=138, x2=315, y2=158
Type: 4
Info: 'OK'
1:
Bounds: x1=79, y1=15, x2=323, y2=100
Type: -120
Info: 'Couldn't complete the last command because ^0.'
2:
Bounds: x1=81, y1=105, x2=325, y2=123
Type: -120
Info: 'Result Code = ^1'
DITL_250_No Printer.txt
Items: (2 entries)
0:
Bounds: x1=262, y1=85, x2=327, y2=105
Type: 4
Info: 'OK'
1:
Bounds: x1=84, y1=14, x2=327, y2=67
Type: -120
Info: 'Printing operations are not possible until you have selected a Printer using the Chooser. '
DITL_200_About_Startup.txt
Items: (6 entries)
0:
Bounds: x1=0, y1=0, x2=480, y2=260
Type: 64
Info: ' ”'
1:
Bounds: x1=0, y1=0, x2=480, y2=265
Type: 64
Info: ' ”'
2:
Bounds: x1=204, y1=260, x2=300, y2=276
Type: 8
Info: '^0'
3:
Bounds: x1=272, y1=358, x2=426, y2=417
Type: 8
Info: '^1'
4:
Bounds: x1=110, y1=278, x2=236, y2=292
Type: -120
Info: ''
5:
Bounds: x1=242, y1=278, x2=374, y2=292
Type: -120
Info: ''
DITL_151_Save Changes.txt
Items: (4 entries)
0:
Bounds: x1=35, y1=74, x2=117, y2=94
Type: 4
Info: 'Yes'
1:
Bounds: x1=35, y1=111, x2=117, y2=131
Type: 4
Info: 'No'
2:
Bounds: x1=205, y1=111, x2=287, y2=131
Type: 4
Info: 'Cancel'
3:
Bounds: x1=25, y1=14, x2=291, y2=55
Type: -120
Info: 'Save changes to “^0” before ^1?'
DITL_150_Need one item selected.txt
Items: (5 entries)
0:
Bounds: x1=186, y1=116, x2=255, y2=137
Type: 4
Info: 'OK'
1:
Bounds: x1=0, y1=0, x2=440, y2=96
Type: -120
Info: '^0'
2:
Bounds: x1=180, y1=208, x2=240, y2=228
Type: -128
Info: ''
3:
Bounds: x1=180, y1=208, x2=240, y2=228
Type: -128
Info: ''
4:
Bounds: x1=40, y1=116, x2=120, y2=136
Type: -128
Info: 'Button'
DITL_131_validation.txt
Items: (2 entries)
0:
Bounds: x1=231, y1=98, x2=291, y2=118
Type: 4
Info: 'OK'
1:
Bounds: x1=25, y1=14, x2=299, y2=82
Type: -120
Info: '^0'
DITL_130_General.txt
Items: (2 entries)
0:
Bounds: x1=231, y1=98, x2=291, y2=118
Type: 4
Info: 'OK'
1:
Bounds: x1=25, y1=14, x2=299, y2=82
Type: -120
Info: '^0'
DITL_129_Confirm Revert.txt
Items: (4 entries)
0:
Bounds: x1=208, y1=60, x2=290, y2=80
Type: 4
Info: 'OK'
1:
Bounds: x1=105, y1=60, x2=187, y2=80
Type: 4
Info: 'Cancel'
2:
Bounds: x1=113, y1=5, x2=293, y2=45
Type: -120
Info: 'Revert to the last version saved ?'
3:
Bounds: x1=10, y1=47, x2=66, y2=64
Type: -120
Info: 'Caution'
DITL_128_Severe Error.txt
Items: (3 entries)
0:
Bounds: x1=264, y1=104, x2=324, y2=124
Type: 4
Info: 'Proceed'
1:
Bounds: x1=168, y1=104, x2=228, y2=124
Type: 4
Info: 'Quit'
2:
Bounds: x1=80, y1=16, x2=332, y2=87
Type: -120
Info: '^0Result Code = ^1'
DITL_120_SelectDestinationEarlyItems.txt
Items: (12 entries)
0:
Bounds: x1=280, y1=18, x2=360, y2=38
Type: 4
Info: 'Open'
1:
Bounds: x1=280, y1=48, x2=360, y2=68
Type: 4
Info: 'Cancel'
2:
Bounds: x1=10, y1=26, x2=267, y2=28
Type: -64
Info: ' Δ'
3:
Bounds: x1=265, y1=78, x2=367, y2=94
Type: 0
Info: ''
4:
Bounds: x1=280, y1=103, x2=360, y2=123
Type: 4
Info: 'Eject'
5:
Bounds: x1=280, y1=128, x2=360, y2=148
Type: 4
Info: 'Desktop'
6:
Bounds: x1=10, y1=66, x2=256, y2=195
Type: 0
Info: ''
7:
Bounds: x1=10, y1=41, x2=256, y2=60
Type: 0
Info: ''
8:
Bounds: x1=10, y1=9, x2=256, y2=26
Type: -120
Info: '^0'
9:
Bounds: x1=24, y1=201, x2=236, y2=221
Type: 4
Info: ''
10:
Bounds: x1=0, y1=0, x2=0, y2=0
Type: 0
Info: ''
11:
Bounds: x1=280, y1=153, x2=360, y2=173
Type: 4
Info: 'Help'
DITL_100_Copying predestined files.txt
Items: (7 entries)
0:
Bounds: x1=47, y1=120, x2=109, y2=139
Type: 4
Info: 'Install'
1:
Bounds: x1=169, y1=120, x2=231, y2=139
Type: 4
Info: 'Cancel'
2:
Bounds: x1=190, y1=199, x2=252, y2=218
Type: 4
Info: 'Help'
3:
Bounds: x1=8, y1=6, x2=274, y2=22
Type: -120
Info: 'Copying files to preassigned locations...'
4:
Bounds: x1=8, y1=32, x2=211, y2=48
Type: -120
Info: 'Space available: ^1K'
5:
Bounds: x1=8, y1=48, x2=211, y2=64
Type: -120
Info: 'Space required: ^0K'
6:
Bounds: x1=8, y1=74, x2=251, y2=106
Type: -120
Info: 'You can... '
DITL_99_App changed warning.txt
Items: (5 entries)
0:
Bounds: x1=84, y1=76, x2=160, y2=98
Type: 4
Info: 'Continue'
1:
Bounds: x1=178, y1=76, x2=254, y2=98
Type: 4
Info: 'Cancel'
2:
Bounds: x1=72, y1=16, x2=312, y2=68
Type: -120
Info: 'This application has been modified relative to its original state. Continue anyway?'
Info: 'This file already exists on your hard diskand appears to have been modified sinceit was installed. Do you want to preservethe existing file or replace it?'
9:
Bounds: x1=11, y1=10, x2=43, y2=42
Type: -96
Info: ' '
DITL_60_Confirm folder name.txt
Items: (8 entries)
0:
Bounds: x1=389, y1=7, x2=451, y2=26
Type: 4
Info: 'Install'
1:
Bounds: x1=389, y1=40, x2=451, y2=59
Type: 4
Info: 'Cancel'
2:
Bounds: x1=50, y1=32, x2=309, y2=48
Type: -120
Info: ''
3:
Bounds: x1=52, y1=5, x2=191, y2=21
Type: -120
Info: 'Confirm folder name'
4:
Bounds: x1=50, y1=55, x2=376, y2=124
Type: -120
Info: 'This folder already exists. Installation will onlyreplace files whose names match those selectedto be installed. Any additional files that you mayhave placed here will not be affected.'
5:
Bounds: x1=52, y1=24, x2=368, y2=26
Type: -64
Info: ' Δ'
6:
Bounds: x1=385, y1=3, x2=455, y2=30
Type: -64
Info: '™'
7:
Bounds: x1=9, y1=7, x2=41, y2=39
Type: -96
Info: ' '
DITL_57_Must Have Original Disk.txt
Items: (2 entries)
0:
Bounds: x1=230, y1=80, x2=288, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=10, x2=292, y2=70
Type: -120
Info: 'You must have the original disk to install this update.'
DITL_56_Single File Decomp Err.txt
Items: (2 entries)
0:
Bounds: x1=154, y1=83, x2=212, y2=103
Type: 4
Info: 'OK'
1:
Bounds: x1=79, y1=10, x2=291, y2=70
Type: -120
Info: 'File decompression error, possibly due to insufficient disk space on target disk drive.'
DITL_55_Control file too new.txt
Items: (4 entries)
0:
Bounds: x1=181, y1=108, x2=251, y2=129
Type: 4
Info: 'OK'
1:
Bounds: x1=98, y1=12, x2=414, y2=92
Type: -120
Info: 'The control file in use is a version ^0 format. This revision of the installer can only use a control file of version ^1 or older. Please use a more recent installer.'
Info: 'To run ^0, there should be ^1 Kbytes available. There is currently ^2K free (not used by the system). Some inits, fonts, and/or DAs may need to be disabled in order to increase this amount.'
Info: 'The serial number entered is not valid. Use the serial number exactly as shown in your package, including letters and hyphens. For details on locating the serial number, click the Help button in the previous dialog box.'
2:
Bounds: x1=10, y1=8, x2=42, y2=40
Type: -96
Info: ' '
DITL_51_Installation not completed.txt
Items: (3 entries)
0:
Bounds: x1=152, y1=114, x2=221, y2=135
Type: 4
Info: 'OK'
1:
Bounds: x1=65, y1=6, x2=335, y2=105
Type: -120
Info: 'The installation was not completed. Files may have been copied to the PageMaker 6.0 Tryout folder or System folder before the installation was canceled. Some of these may be compressed, and should be removed.'
2:
Bounds: x1=16, y1=6, x2=48, y2=38
Type: -96
Info: ' '
DITL_50_Colon not permitted in folder names.txt
Items: (2 entries)
0:
Bounds: x1=46, y1=80, x2=115, y2=101
Type: 4
Info: 'OK'
1:
Bounds: x1=1, y1=10, x2=157, y2=67
Type: -120
Info: 'Colon (':') not permitted in folder names.'
DITL_49_Not enough memory.txt
Items: (3 entries)
0:
Bounds: x1=166, y1=80, x2=235, y2=101
Type: 4
Info: 'Quit'
1:
Bounds: x1=93, y1=8, x2=343, y2=66
Type: -120
Info: 'There is not enough memory to run the Installer.'
2:
Bounds: x1=15, y1=11, x2=47, y2=43
Type: -96
Info: ' '
DITL_48_Unable to display this file.txt
Items: (2 entries)
0:
Bounds: x1=153, y1=69, x2=222, y2=90
Type: 4
Info: 'OK'
1:
Bounds: x1=81, y1=8, x2=343, y2=49
Type: -120
Info: 'The Installer is unable to display this file.'
DITL_47_File to large to display.txt
Items: (2 entries)
0:
Bounds: x1=152, y1=78, x2=221, y2=99
Type: 4
Info: 'OK'
1:
Bounds: x1=81, y1=8, x2=340, y2=63
Type: -120
Info: 'This file is too large to display entirely. Only the first 32,000 characters will be displayed.'
DITL_46_Installation complete.txt
Items: (3 entries)
0:
Bounds: x1=396, y1=289, x2=465, y2=310
Type: 4
Info: 'Quit'
1:
Bounds: x1=132, y1=283, x2=349, y2=317
Type: -120
Info: ' The installation is complete.Click Quit to exit the Installer.'
2:
Bounds: x1=0, y1=0, x2=480, y2=280
Type: 64
Info: ' ”'
DITL_45_Confirm personalization.txt
Items: (9 entries)
0:
Bounds: x1=388, y1=30, x2=450, y2=49
Type: 4
Info: 'OK'
1:
Bounds: x1=388, y1=55, x2=450, y2=74
Type: 4
Info: 'Change'
2:
Bounds: x1=123, y1=32, x2=365, y2=48
Type: -120
Info: ' ^0'
3:
Bounds: x1=123, y1=58, x2=365, y2=74
Type: -120
Info: ' ^1'
4:
Bounds: x1=123, y1=84, x2=365, y2=100
Type: -120
Info: ' ^2'
5:
Bounds: x1=4, y1=6, x2=467, y2=22
Type: -120
Info: 'Confirm your personal information: '
6:
Bounds: x1=64, y1=32, x2=108, y2=48
Type: -120
Info: 'Name:'
7:
Bounds: x1=41, y1=58, x2=108, y2=74
Type: -120
Info: 'Company:'
8:
Bounds: x1=10, y1=84, x2=108, y2=100
Type: -120
Info: 'Serial number:'
DITL_44_Lock disk.txt
Items: (2 entries)
0:
Bounds: x1=121, y1=61, x2=190, y2=82
Type: 4
Info: 'Continue'
1:
Bounds: x1=53, y1=8, x2=311, y2=47
Type: -120
Info: 'Please remember to lock the disk “^0” for safekeeping.'
DITL_43_Unexpected internal error.txt
Items: (2 entries)
0:
Bounds: x1=66, y1=225, x2=136, y2=246
Type: 4
Info: 'Stop'
1:
Bounds: x1=65, y1=10, x2=281, y2=213
Type: -120
Info: 'The Installer has an unexpected internal error. The error code is “^0”. The error message is “^1”'
DITL_42_Wrong System Version.txt
Items: (4 entries)
0:
Bounds: x1=185, y1=148, x2=261, y2=170
Type: 4
Info: 'Cancel'
1:
Bounds: x1=36, y1=148, x2=112, y2=170
Type: 4
Info: 'Continue'
2:
Bounds: x1=88, y1=14, x2=304, y2=134
Type: -120
Info: '^0 requires System ^1 or later. System ^2 is currently installed. '
3:
Bounds: x1=14, y1=15, x2=46, y2=47
Type: -96
Info: ' '
DITL_41_Error Alert.txt
Items: (5 entries)
0:
Bounds: x1=66, y1=201, x2=136, y2=222
Type: 4
Info: 'Continue'
1:
Bounds: x1=144, y1=201, x2=221, y2=222
Type: 4
Info: 'Cancel'
2:
Bounds: x1=68, y1=12, x2=241, y2=89
Type: -120
Info: '^0'
3:
Bounds: x1=68, y1=90, x2=240, y2=152
Type: -120
Info: '^2'
4:
Bounds: x1=68, y1=174, x2=240, y2=192
Type: -120
Info: '^3'
DITL_20_Select Language First Dialog.txt
Items: (8 entries)
0:
Bounds: x1=0, y1=0, x2=480, y2=260
Type: -64
Info: ' ”'
1:
Bounds: x1=240, y1=340, x2=250, y2=350
Type: -64
Info: 'Í'
2:
Bounds: x1=0, y1=0, x2=480, y2=265
Type: -64
Info: ' ”'
3:
Bounds: x1=240, y1=340, x2=250, y2=350
Type: -64
Info: 'Í'
4:
Bounds: x1=7, y1=266, x2=158, y2=286
Type: 4
Info: 'U.S. English'
5:
Bounds: x1=165, y1=266, x2=316, y2=286
Type: 4
Info: 'Canadian English'
6:
Bounds: x1=323, y1=266, x2=474, y2=286
Type: 4
Info: 'International English'
7:
Bounds: x1=200, y1=288, x2=280, y2=308
Type: 4
Info: 'Quit'
DITL_19_ConfirmArchitectureType.txt
Items: (6 entries)
0:
Bounds: x1=20, y1=14, x2=383, y2=63
Type: -120
Info: 'Select the installation type that matches the currently installed version of PageMaker.Your machine is a ^0.'
1:
Bounds: x1=220, y1=200, x2=345, y2=220
Type: 4
Info: 'Macintosh'
2:
Bounds: x1=49, y1=200, x2=174, y2=220
Type: 4
Info: 'Power Macintosh'
3:
Bounds: x1=20, y1=71, x2=383, y2=104
Type: -120
Info: 'To install components for the Power Macintosh, click Power Macintosh.'
4:
Bounds: x1=20, y1=153, x2=389, y2=187
Type: -120
Info: 'Note: Power Macintosh components require PageMaker for the Power Macintosh to operate correctly.'
5:
Bounds: x1=20, y1=112, x2=386, y2=144
Type: -120
Info: 'To install components for the Macintosh, click Macintosh.'
DITL_18_ChooseArchitectureType.txt
Items: (6 entries)
0:
Bounds: x1=20, y1=14, x2=383, y2=45
Type: -120
Info: 'Choose the version of PageMaker you want to install.Your machine is a ^0.'
1:
Bounds: x1=216, y1=182, x2=341, y2=202
Type: 4
Info: 'Macintosh'
2:
Bounds: x1=45, y1=182, x2=170, y2=202
Type: 4
Info: 'Power Macintosh'
3:
Bounds: x1=20, y1=55, x2=383, y2=88
Type: -120
Info: 'To install PageMaker for the Power Macintosh, click “Power Macintosh.”'
4:
Bounds: x1=20, y1=133, x2=384, y2=173
Type: -120
Info: 'Note: PageMaker for the Power Macintosh will not run on a Macintosh that does not use the PowerPC chip.'
5:
Bounds: x1=20, y1=94, x2=386, y2=126
Type: -120
Info: 'To install PageMaker for the Macintosh, click “Macintosh.”'
DITL_15_RequestOldDisk.txt
Items: (5 entries)
0:
Bounds: x1=190, y1=170, x2=250, y2=190
Type: 4
Info: 'Cancel'
1:
Bounds: x1=60, y1=11, x2=230, y2=38
Type: -120
Info: 'Please insert the disk'
2:
Bounds: x1=8, y1=12, x2=40, y2=44
Type: -96
Info: 'ó'
3:
Bounds: x1=60, y1=41, x2=231, y2=73
Type: -120
Info: ''
4:
Bounds: x1=60, y1=77, x2=231, y2=144
Type: -120
Info: ''
DITL_12_Not on a CD.txt
Items: (2 entries)
0:
Bounds: x1=167, y1=145, x2=248, y2=166
Type: 4
Info: 'OK'
1:
Bounds: x1=78, y1=25, x2=385, y2=95
Type: -120
Info: 'This set of files can only be installed from the original CD. Please quit and relaunch the Installer Utility found on the original CD.'
DITL_11_Confirm Lang Replace.txt
Items: (9 entries)
0:
Bounds: x1=363, y1=7, x2=440, y2=26
Type: 4
Info: 'Cancel all'
1:
Bounds: x1=362, y1=37, x2=439, y2=56
Type: 4
Info: 'Replace'
2:
Bounds: x1=362, y1=63, x2=439, y2=82
Type: 4
Info: 'Replace all'
3:
Bounds: x1=51, y1=5, x2=176, y2=21
Type: -120
Info: 'Replace dictionary'
4:
Bounds: x1=51, y1=33, x2=310, y2=49
Type: -120
Info: ''
5:
Bounds: x1=51, y1=59, x2=310, y2=114
Type: -120
Info: 'Installing this dictionary will replacethe current base dictionary. The userdictionary will not be affected. '
6:
Bounds: x1=52, y1=22, x2=340, y2=24
Type: -64
Info: ' Δ'
7:
Bounds: x1=358, y1=4, x2=443, y2=31
Type: -64
Info: 'ó'
8:
Bounds: x1=4, y1=6, x2=36, y2=38
Type: -96
Info: ' '
DITL_10_Confirm Lang Removal.txt
Items: (9 entries)
0:
Bounds: x1=364, y1=8, x2=433, y2=27
Type: 4
Info: 'Cancel all'
1:
Bounds: x1=364, y1=37, x2=433, y2=56
Type: 4
Info: 'Delete'
2:
Bounds: x1=364, y1=63, x2=433, y2=82
Type: 4
Info: 'Delete all'
3:
Bounds: x1=53, y1=5, x2=179, y2=21
Type: -120
Info: 'Remove dictionary'
4:
Bounds: x1=53, y1=33, x2=312, y2=49
Type: -120
Info: ''
5:
Bounds: x1=53, y1=59, x2=345, y2=124
Type: -120
Info: 'Removing this dictionary will result inthe deletion of its folder and its contents.This dictionary is located in the Proximityfolder under the Aldus folder.'
6:
Bounds: x1=54, y1=22, x2=342, y2=24
Type: -64
Info: ' Δ'
7:
Bounds: x1=360, y1=4, x2=437, y2=31
Type: -64
Info: 'ó'
8:
Bounds: x1=8, y1=6, x2=40, y2=38
Type: -96
Info: ' '
DITL_7_Generic Display Dialog.txt
Items: (11 entries)
0:
Bounds: x1=359, y1=9, x2=425, y2=28
Type: 4
Info: 'OK'
1:
Bounds: x1=359, y1=38, x2=425, y2=57
Type: 4
Info: 'Cancel'
2:
Bounds: x1=359, y1=64, x2=425, y2=65
Type: -64
Info: ' «'
3:
Bounds: x1=359, y1=72, x2=425, y2=91
Type: 4
Info: 'Help'
4:
Bounds: x1=359, y1=98, x2=425, y2=117
Type: 4
Info: 'Select All'
5:
Bounds: x1=8, y1=6, x2=339, y2=22
Type: -120
Info: 'Generic display title '
6:
Bounds: x1=9, y1=23, x2=337, y2=25
Type: -64
Info: ' Δ'
7:
Bounds: x1=8, y1=34, x2=331, y2=66
Type: -120
Info: 'Instructions placeholder '
8:
Bounds: x1=10, y1=76, x2=266, y2=204
Type: 0
Info: ''
9:
Bounds: x1=355, y1=5, x2=429, y2=32
Type: -64
Info: 'Æ'
10:
Bounds: x1=8, y1=214, x2=411, y2=246
Type: -120
Info: 'Another placeholder '
DITL_6_Install Languages.txt
Items: (12 entries)
0:
Bounds: x1=357, y1=9, x2=419, y2=28
Type: 4
Info: 'OK'
1:
Bounds: x1=357, y1=38, x2=419, y2=57
Type: 4
Info: 'Cancel'
2:
Bounds: x1=183, y1=68, x2=245, y2=87
Type: 4
Info: 'Add'
3:
Bounds: x1=183, y1=94, x2=245, y2=113
Type: 4
Info: 'Remove'
4:
Bounds: x1=183, y1=120, x2=245, y2=139
Type: 4
Info: 'Help'
5:
Bounds: x1=10, y1=70, x2=170, y2=230
Type: 0
Info: ''
6:
Bounds: x1=259, y1=70, x2=419, y2=230
Type: 0
Info: ''
7:
Bounds: x1=257, y1=49, x2=323, y2=65
Type: -120
Info: 'Installed:'
8:
Bounds: x1=8, y1=49, x2=75, y2=65
Type: -120
Info: 'Available:'
9:
Bounds: x1=8, y1=6, x2=196, y2=22
Type: -120
Info: 'Dictionaries'
10:
Bounds: x1=9, y1=23, x2=335, y2=25
Type: -64
Info: ' Δ'
11:
Bounds: x1=353, y1=5, x2=423, y2=32
Type: -64
Info: '™'
DITL_5_Help.txt
Items: (4 entries)
0:
Bounds: x1=175, y1=208, x2=228, y2=228
Type: 4
Info: 'OK'
1:
Bounds: x1=52, y1=5, x2=329, y2=202
Type: -128
Info: ''
2:
Bounds: x1=241, y1=208, x2=301, y2=228
Type: -128
Info: ''
3:
Bounds: x1=7, y1=10, x2=39, y2=42
Type: -96
Info: ' '
DITL_4_Choose File(s).txt
Items: (11 entries)
0:
Bounds: x1=351, y1=9, x2=417, y2=28
Type: 4
Info: 'OK'
1:
Bounds: x1=351, y1=38, x2=417, y2=57
Type: 4
Info: 'Cancel'
2:
Bounds: x1=351, y1=64, x2=417, y2=65
Type: -64
Info: ' «'
3:
Bounds: x1=351, y1=72, x2=417, y2=91
Type: 4
Info: 'Help'
4:
Bounds: x1=351, y1=98, x2=417, y2=117
Type: 4
Info: 'Select all'
5:
Bounds: x1=8, y1=6, x2=329, y2=22
Type: -120
Info: 'Choose file(s) title '
6:
Bounds: x1=9, y1=23, x2=329, y2=25
Type: -64
Info: ' Δ'
7:
Bounds: x1=8, y1=34, x2=331, y2=66
Type: -120
Info: 'Instructions placeholder '
8:
Bounds: x1=10, y1=76, x2=266, y2=204
Type: 0
Info: ''
9:
Bounds: x1=347, y1=5, x2=421, y2=32
Type: -64
Info: 'Æ'
10:
Bounds: x1=8, y1=214, x2=411, y2=246
Type: -120
Info: 'Another placeholder '
DITL_3_Personalize_Serial Number.txt
Items: (12 entries)
0:
Bounds: x1=403, y1=30, x2=465, y2=49
Type: 4
Info: 'OK'
1:
Bounds: x1=8, y1=6, x2=465, y2=23
Type: -120
Info: 'Please enter your personal information. '
2:
Bounds: x1=64, y1=32, x2=108, y2=48
Type: -120
Info: 'Name:'
3:
Bounds: x1=41, y1=58, x2=108, y2=74
Type: -120
Info: 'Company:'
4:
Bounds: x1=10, y1=84, x2=108, y2=100
Type: -120
Info: 'Serial number:'
5:
Bounds: x1=126, y1=32, x2=368, y2=48
Type: 16
Info: ''
6:
Bounds: x1=126, y1=58, x2=368, y2=74
Type: 16
Info: ''
7:
Bounds: x1=126, y1=84, x2=368, y2=100
Type: 16
Info: ''
8:
Bounds: x1=404, y1=120, x2=466, y2=139
Type: -128
Info: ''
9:
Bounds: x1=403, y1=82, x2=465, y2=101
Type: 4
Info: 'Help'
10:
Bounds: x1=403, y1=56, x2=465, y2=75
Type: 4
Info: 'Cancel'
11:
Bounds: x1=11, y1=110, x2=468, y2=149
Type: -120
Info: 'A valid serial number or service contract number will be required when you call Adobe Technical Support.'